| Subject: | Re: OBD2 gauges |
| From: | Harry Hoffman <hhoffman@IP-SOLUTIONS.NET> |
| Date: | Sun, 16 Feb 2020 09:28:14 -0500 |
Hey Kyle,
I’ve got a Bostig install and don’t have the issues you describe. Mine is
one of the original series but there were electronics to adjust the tach.
I had hooked up a Bluetooth OBD II sensor and used an app on my phone. But
the sensor was always on and drew too much from the battery so I removed it.
Hope this is helpful.
Cheers,
Harry
On Sat, Feb 15, 2020 at 10:56 PM Kyle Stuhr <uglybones@hotmail.com> wrote:
> With all the talk about displays recently, now is a good time to bring up
> this question. Do any of you have a favorite OBD2 gauge? I recently did a
> Bostig conversion and my stock 84 gauges suck. I have no tach and my speedo
> is off by about 25%. Pegged on the 85 mph speedo is about 70 IRL. Most
> Bostig guys seem to use the UltraGauge with this conversion but there are a
> lot of choices out there. I assume the Subie guys use these things too.
> What is your experience?
>
> Sent from the briny depths.